Filter
Top Products
33-39
Cisco ASA 5500 Series Configuration Guide using ASDM
Chapter 33 Configuring Network Object NAT (ASA 8.3 and Later)
Feature History for Network Object NAT
Flat range of PAT ports for a PAT pool 8.4(3) If available, the real source port number is used for the
mapped port. However, if the real port is not available, by
default the mapped ports are chosen from the same range of
ports as the real port number: 0 to 511, 512 to 1023, and
1024 to 65535. Therefore, ports below 1024 have only a
small PAT pool.
If you have a lot of traffic that uses the lower port ranges,
when using a PAT pool, you can now specify a flat range of
ports to be used instead of the three unequal-sized tiers:
either 1024 to 65535, or 1 to 65535.
We modified the following screens: Configuration >
Firewall > NAT Rules > Add/Edit Network Object.
This feature is not available in 8.5(1) or 8.6(1).
Table 33-1 Feature History for Network Object NAT (continued)
Feature Name
Platform
Releases Feature Information