Filter
Top Products
34-34
Cisco ASA 5500 Series Configuration Guide using ASDM
Chapter 34 Configuring Twice NAT (ASA 8.3 and Later)
Configuration Examples for Twice NAT
Step 10 Set the source and destination interfaces:
Step 11 For the Original Source Address, type the name of the inside network object (myInsideNetwork) or click
the browse button to choose it.
Step 12 For the Original Destination Address, click the browse button to add a new network object for DMZ
network 2 in the Browse Original Destination Address dialog box.
a. Add the new network object.
b. Define the DMZ network 2 addresses, and click OK.