Filter
Top Products
CHAPTER
3-1
Cisco UCS C200 Server Installation and Service Guide
OL-20732-02
3
Maintaining the Server
This chapter describes how to diagnose hardware problems with status LEDs and how to install or
replace hardware components, and includes the following sections:
• Server Monitoring and Management Tools, page 3-1
• Status LEDs, page 3-2
• Preparing for Component Installation, page 3-7
• Installing or Replacing Components, page 3-13
Server Monitoring and Management Tools
Cisco Integrated Management Interface (CIMC)
You can monitor the server inventory, health, and system event logs by using the built-in Cisco Integrated
Management Controller (CIMC) GUI or CLI interfaces. See the user documentation for your firmware
release at the following URL:
http://www.cisco.com/en/US/products/ps10739/products_installation_and_configuration_guides_list.html
Server Configuration Utility
Cisco has also developed the Cisco Server Configuration Utility for C-Series servers, which can aid and
simplify the following tasks:
• Monitoring server inventory and health
• Diagnosing common server problems with diagnostic tools and logs
• Setting the BIOS booting order
• Configuring some RAID configurations
• Installing operating systems
This utility is shipped with new servers on CD. You can also download the ISO from Cisco.com. See the
user documentation for this utility at the following URL:
http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/ucsscu/user/guide/20/SCUUG20.html