Cisco Systems C200 Personal Computer User Manual


 
3-34
Cisco UCS C200 Server Installation and Service Guide
OL-20732-02
Chapter 3 Maintaining the Server
Installing or Replacing Components
Figure 3-21 Removing and Replacing a PCIe Riser Card Assembly
Replacing a PCIe Card
This section contains the following topics:
Replacement Procedure, page 3-35
Special Considerations for the Cisco UCS P81E Virtual Interface Card (N2XX-ACPCI01),
page 3-37
How to Identify Which Power Supply Model is in Your Server, page 3-37
Installing Multiple PCIe Cards and Resolving Limited Resources, page 3-38
Note If you are installing a Cisco UCS P81E Virtual Interface Card (N2XX-ACPCI01), there are prerequisite
considerations. See Special Considerations for the Cisco UCS P81E Virtual Interface Card
(N2XX-ACPCI01), page 3-37.
Note See also RAID Controller Considerations, page C-1 for information about supported controllers and
cables.
The qualified and supported part numbers for this component are subject to change over time. For the most
up-to-date list of replaceable components, see the following URL and then scroll to Technical Specifications:
http://www.cisco.com/en/US/products/ps10493/products_data_sheets_list.html
1 Riser card assembly (top view) 2 Riser card
1
2
1