Filter
Top Products
2-24
Cisco ME 3400 Ethernet Access Switch Hardware Installation Guide
OL-7677-04
Chapter 2 Switch Installation
Where to Go Next
Where to Go Next
If the default configuration is satisfactory, the switch does not need further configuration. You can use
any of these management options to change the default configuration:
• Use the CLI from the console to configure the switch. See the switch software configuration guide
or the switch command reference on for information about using the CLI with a Cisco ME switch.
For setup instructions that use the CLI setup program, go to Appendix D, “Configuring the Switch
with the CLI-Based Setup Program.”
• Start an SNMP application such as the CiscoView application.