Filter
Top Products
2-55
User Guide for the Cisco Network Analysis Module (NAM) Traffic Analyzer, 5.0
OL-22617-01
Chapter 2 Setting Up The NAM Traffic Analyzer
Managed Device
Custom Export
You can enable Custom Export to send response time data to an external reporting console such as
NetQoS SuperAgent.
After you enable Custom Export, you may also want to enable the “Export Passthrough Response Time”
option when creating a WAAS Data Source (Setup > NAM Data Sources > Auto Create).
To enable the NAM to export response time data to an external console:
Step 1 From the NAM GUI, choose Setup > Data Export > Custom Export.
The Response Time Export window displays.
Step 2 Check the Enable Export check box.
Step 3 Enter the IP address of the external reporting console in the IP Address field.
Step 4 Enter the UDP port number of the external console (blank is default).
Step 5 Optionally, click Export Non-WAAS Traffic.
This enables the export of SPAN and other data as well as WAAS traffic.
Step 6 Click Submit to enable traffic export, or click Reset to clear the changes from the screen.
Managed Device
A managed device is the device on which SPAN is configured, and where system health ifTable statistics
are polled via SNMP.
The NAM 5.0 Traffic Analyzer menu selections for setting up Managed Devices are:
• Device Information, page 2-55
• NBAR Protocol Discovery, page 2-57
Device Information
To view the switch information, choose Setup > Managed Device > Device Information. The fields are
described in
Table 2-24, Switch Information.
Ta ble 2-24 Switch Information
Field Description
SNMP Test information
Displays the IP address of the NAM and the switch that the SNMP test
occurred on.
Name
Name of the switch.
Hardware
Hardware description of the switch.
Supervisor Software Version
Current software version of the Supervisor.
System Uptime
Total time the switch has been running.
Location
Physical location of the switch.