Filter
Top Products
Chapter 6 Maintaining the Router
Removing and Installing the Front Door on Cisco 12006 and Cisco 12406 Enhanced Series Router
6-6
Cisco 12006 and Cisco 12406 Router Installation and Configuration Guide
OL-11497-03
Step 4 Remove the bumpers and pivot blocks from the door as shown in Figure 6-3.
Figure 6-3 Removing the Bumpers and Pivot Blocks
Step 5 Reinstall the hardware to the opposite sides of the front door:
a. Mount pivot blocks to the left side and tighten the screws until snug.
b. Mount the bumpers to the right side and tighten the screws until snug.
1 Bumpers 2 Pivot blocks
149545
2
1