Filter
Top Products
6-21
Cisco 12006 and Cisco 12406 Router Installation and Configuration Guide
OL-11497-03
Chapter 6 Maintaining the Router
Removing and Replacing an AC PEM
Step 5 Install the new power supply (Figure 6-9):
a. Slide the power supply into the bay until it mates with its backplane
connector.
Caution To prevent damage to the power shelf backplane connector, do not use excessive
force when inserting the power supply into the chassis.
b. Close the ejector levers and tighten the captive screws to securely seat the
power supply to the backplane connector.
Figure 6-9 Seating the AC Power Supply
84373