Filter
Top Products
6-45
Cisco 12006 and Cisco 12406 Router Installation and Configuration Guide
OL-11497-03
Chapter 6 Maintaining the Router
Removing and Replacing a DC PDU
Step 11 Reinstall the power supplies:
a. Push the power supply into its bay until it mates with its PDU connector.
Caution To prevent damage to the connectors, do not use excessive force when inserting
the power supply into the chassis.
b. Close the ejector levers and tighten the captive screws to securely seat the
power supply to the chassis (
Figure 6-26).
c. Repeat steps a. and b. for the second power supply.
Figure 6-26 Seating a DC Power Supply
101117
O
U
TP
U
T
O
K
IN
P
U
T
O
K
M
ISW
IR
E