Filter
Top Products
Chapter 6 Maintaining the Router
Removing and Replacing the Blower Module
6-12
Cisco 12006 and Cisco 12406 Router Installation and Configuration Guide
OL-11497-03
Figure 6-6 Installing the Blower Module
Troubleshooting the Blower Installation
Use the following procedure to troubleshoot the blower module if it is not
operating properly after installation.
Step 1 Be sure the router is powered on and that all power cords are connected properly.
Step 2 Loosen the four captive screws and reseat the blower module to the chassis.
Retighten the captive screws to ensure the blower module is properly seated to the
backplane connector.
1 Carrying handle 3 Guide pins
2 Captive screws (2 on each side)
129402
H
IG
H
S
P
E
E
D
B
LO
W
E
R
2 31