Filter
Top Products
Chapter 6 Maintaining the Router
Removing and Replacing an AC PDU
6-30
Cisco 12006 and Cisco 12406 Router Installation and Configuration Guide
OL-11497-03
Step 13 Reinstall the power supplies (Figure 6-15):
a. Push the power supply into its bay until it mates with its PDU connector.
Caution To prevent damage to the connectors, do not use excessive force when inserting
the power supply into the chassis.
b. Close the ejector levers and tighten the captive screws to securely seat the
power supply to the chassis.
c. Repeat steps a. and b. for the second power supply.
Figure 6-15 Seating the AC Power Supply
Step 14 Set the power switch on both power supplies to the On (1) position.
84373