Filter
Top Products
A-129
Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01
Appendix A CSG2 Command Reference
ip csg radius pod nas
Command History
Usage Guidelines The PoD message is sent to the NAS IP address that is specified in the NAS-IP-Address attribute (4) in
the RADIUS Accounting Start message. This command specifies the NAS listening port, as well as the
key to use in calculating the Authenticator.
The RADIUS Accounting Start message which specifies the NAS IP address to which to send the PoD
message must be received on an IP address specified by the ip csg radius proxy or ip csg radius
endpoint command configured in global configuration mode.
In some networks, many NASes might use the same listening port and key. In such networks, you can
use this command to specify the range of NAS IP addresses.
If no IP addresses are specified, the port number and key apply to all NASes. The “global” definition is
used if a specific range is not configured for the NAS when the PoD message is sent.
Examples The following example shows how to specify NAS ports and keys:
ip csg radius pod nas 1.1.1.0 1.1.1.255 1700 key secret
ip csg radius pod nas 1701 key password
Related Commands
Release Modification
12.4(11)MD This command was migrated from CSG1.
Changes from CSG1:
• The name of this command changed from radius pod nas to ip csg radius pod
nas.
• The configuration mode for this command changed from CSG user group
configuration to global configuration.
• The vrf vrf-name keyword and argument were added.
Command Description
ip csg radius pod attribute Specifies the RADIUS attributes to be copied from the RADIUS Start
message and sent to the NAS in the PoD.
ip csg radius pod timeout Specifies the number of times to retry the RADIUS PoD message if it
is not acknowledged by means of an ACK message, and the interval
between retransmissions.