Filter
Top Products
A-27
Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01
Appendix A CSG2 Command Reference
debug ip csg
debug ip csg
To set the flags to obtain debugging output for the various CSG2 components, use the debug ip csg
command in privileged EXEC mode. To disable the debugging feature, use the no form of this command.
debug ip csg {all | acl number [vrf vrf-name | global] | configuration sync | content | crashinfo |
error | frag | ftp | gtp {any | bma [priority] | ipc | psd | quota-server [priority]} | http [detail]
| imap | interm | ipc [detail] | iscsi [detail] | other | packet [dump] | policy | pop3 |
psd [detail] | qs [detail] | radius [detail] | replicate | rtsp
[detail] | service [detail | ha] |
session {event | state [detail]} | sip | smtp | stats | tlv | udb [xml] | users | wap [detail] | xml}
no debug ip csg {all | acl number [vrf vrf-name | global] | configuration sync | content | crashinfo
| error | frag | ftp | gtp {any | bma [priority] | ipc | psd | quota-server [priority]} | http [detail]
| imap | interm | ipc [detail] | iscsi
[detail] | other | packet [dump] | policy | pop3 |
psd [detail] | qs [detail] | radius [detail] | replicate | rtsp [detail] | service [detail | ha] |
session {event | state [detail]} | sip | smtp | stats | tlv | udb [xml] | users | wap [detail] | xml}
Syntax Description all Generates debugging output for all CSG2 components.
acl number Generates debugging output for all subscribers in a simple access control
list (ACL).
vrf vrf-name (Optional) Generates debugging output for the Virtual Routing and
Forwarding (VRF) table with the ACL.
global (Optional) Generates debugging output for the default routing table with the
ACL.
configuration sync Generates debugging output for the configuration synchronization
component.
content Generates debugging output for the CSG2 content debug messages,
indicating the results of the content match algorithm. This output is filtered
if debug ip csg acl has been configured.
crashinfo
Generates debugging output for the crash information component.
error Generates debugging output for situations that might indicate a problem.
frag Generates debugging output for the CSG2 fragment database.
ftp Generates debugging output for the FTP component.
gtp any Generates debugging output for the general packet radio service (GPRS)
tunneling protocol (GTP) component’s interaction with components other
than the Billing Mediation Agent (BMA), the Interprocessor
Communication (IPC) component, the Persistent Storage Device (PSD)
component, or the quota server.
gtp bma [priority] Generates debugging output for the GTP component’s interaction with the
BMA.
To generate detailed debugging output for the GTP component’s interaction
with a specific BMA, specify the quota server’s priority.
gtp ipc Generates debugging output for the GTP component’s interaction with the
IPC component.
gtp psd Generates debugging output for the GTP component’s interaction with the
PSD component.