Filter
Top Products
A-154
Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01
Appendix A CSG2 Command Reference
ip csg report usage
ip csg report usage
To enable CSG2 supplemental usage reporting to the quota server, use the ip csg report usage command
in global configuration mode. To disable supplemental usage reporting, use the no form of this
command.
ip csg report usage {bytes ip | seconds}
no ip csg report usage {bytes ip | seconds}
Syntax Description
Defaults None
Command Modes Global configuration
Command History
Usage Guidelines Interval report Tag-Length-Values (TLVs) are generated for Service Reauthorization Request, Service
Stop, and Quota Return messages. Reports contain statistics since the last report.
If you want to report both IP bytes and usage in seconds, you can specify both ip csg report usage bytes
ip and ip csg report usage seconds.
Examples The following example shows how to enable supplemental usage reporting for both IP bytes and seconds:
ip csg report usage bytes ip
ip csg report usage seconds
bytes ip Report the number of IP bytes uploaded and downloaded for each
interval.
seconds Report usage in seconds for the interval, as well as the timestamps of
the start of the first and last billable sessions in the interval.
Release Modification
12.4(11)MD This command was migrated from CSG1.
Changes from CSG1:
• The name of this command changed from report usage to ip csg report usage.
• The configuration mode for this command changed from CSG accounting
configuration to global configuration.