Filter
Top Products
A-192
Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01
Appendix A CSG2 Command Reference
meter increment
Examples The following example shows how to configure quota debit increments for Service Duration Billing for
the OFF_NET service.
ip csg service OFF_NET
meter increment 100
Related Commands Command Description
ip csg service Configures a CSG2 content billing service, and enters CSG2
service configuration mode.
meter exclude control sip Excludes call control packets for a Session Initiation Protocol
(SIP) session from the CSG2 usage calculation.
meter exclude mms wap Excludes bytes for a WAP 1.x Multimedia Messaging Service
(MMS) session from the CSG2 usage calculation.
meter exclude network-init sip Excludes incoming Session Initiation Protocol (SIP) transactions
(that is, those that are initiated from the network) from the CSG2
usage calculation.
meter exclude pause rtsp Excludes the Real Time Streaming Protocol (RTSP) PAUSE time
from the CSG2 usage calculation.
meter exclude svc-idle Excludes the final service idle from the CSG2 usage calculation.
meter include imap Specifies which Internet Message Access Protocol (IMAP) bytes
are billed for by the CSG2 when doing prepaid debits.
meter initial Specifies the initial quota debited by the CSG2 from the balance at
the beginning of a service when the service is configured for
Service Duration Billing.
meter minimum Specifies the initial quota debited by the CSG2 from the balance at
the beginning of a service when the service is configured for
Service Duration Billing.