Filter
Top Products
A-217
Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01
Appendix A CSG2 Command Reference
records delay
records delay
To specify the delay before the CSG2 is to send the HTTP Statistics CDR, use the records delay
command in CSG2 content configuration mode. To restore the default setting, use the no form of this
command.
records delay seconds
no records delay
Syntax Description
Defaults The default value is 0 (no records delay).
Command Modes CSG2 content configuration
Command History
Usage Guidelines Specifying a records delay enables CSG2 accounting for retransmitted packets and ACKs after the
transaction closes, but before the connection closes.
Examples The following example shows how to specify a records delay of 5 seconds:
ip csg content MOVIES
records delay 5
Related Commands
seconds Time, in seconds, that the CSG2 is to delay before sending the HTTP statistics
CDR. The range is from 0 to 1234 seconds. The default is 0 (no records delay).
Release Modification
12.4(11)MD This command was introduced.
Command Description
ip csg content Configures content for CSG2 services, and enters CSG2 content
configuration mode.