Filter
Top Products
A-43
Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01
Appendix A CSG2 Command Reference
ip (iSCSI)
ip (iSCSI)
To specify the IP address of an iSCSI target in the target interface profile on the CSG2, use the ip
command in iSCSI configuration mode. To remove the IP address configuration, use the no form of the
command.
ip ip-address
no ip ip-address
Syntax Description
Command Default No default behavior or values.
Command Modes iSCSI configuration
Command History
Usage Guidelines Only one target can be defined per profile.
Examples The following example configures an iSCSI target interface profile with the name targetA to a SCSI
target with the IP address 10.0.0.1.
gprs iscsi targetA
name iqn.2002-10.edu.abc.iol.iscsi.draft20-target:1
ip 10.0.0.1
port 3260
Related Commands
ip-address IP address of the iSCSI target.
Release Modification
12.4(15)MD This command was introduced.
Command Description
ip csg iscsi drain delay Defines the delay interval, in seconds, before draining
packets from the Storage Area Network (SAN) connected to
the Internet Small Computer Systems Interface (iSCSI)
when the Billing Mediation Agent (BMA) becomes active.
ip csg iscsi drain packet Defines the number of packets to be drained from the
Storage Area Network (SAN) connected to the Internet
Small Computer Systems Interface (iSCSI) per drain delay
interval when the Billing Mediation Agent (BMA) becomes
active.
ip csg iscsi profile Specifies the Internet Small Computer Systems Interface
(iSCSI) target to be used as backup storage for the CSG2.