Filter
Top Products
A-171
Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01
Appendix A CSG2 Command Reference
match method
match method
To specify a method match pattern for a CSG2 billing map, use the match method command in CSG2
map configuration mode. To delete the match pattern, use the no form of this command.
match method method-name
no match method method-name
Syntax Description
Defaults None.
Command Modes CSG2 map configuration
Command History
Usage Guidelines This command is valid only for HTTP and SIP.
You can use more than one match method command in CSG2 map configuration mode to specify
multiple method match patterns for a method map:
• If a flow matches any of a map’s method match patterns, then the CSG2 accepts and processes the
flow (unless another map associated with the flow does not match, of course).
• If a flow does not match any of a map’s method match patterns, then the match fails and the CSG2
does not accept or process the flow.
• By default, the method match patterns are case-sensitive. For example, if you define the following
method match pattern:
match method get
but the actual method keyword is GET, then the match fails and the CSG2 does not accept or process
the flow.
If you do not want the method match patterns to be case-sensitive, configure the no ip csg
case-sensitive command.
method-name Method to be matched. Valid methods are:
• Extension method name of 1 to 15 characters
• connect—HTTP CONNECT method
• get —HTTP GET method
• head—HTTP HEAD method
• post—HTTP POST method
Release Modification
12.4(11)MD This command was introduced.
12.4(15)MD Support for Session Initiation Protocol (SIP) methods was added.