Filter
Top Products
A-178
Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01
Appendix A CSG2 Command Reference
meter exclude control sip
meter exclude control sip
To exclude call control packets for a Session Initiation Protocol (SIP) session from the CSG2 usage
calculation, use the meter exclude control sip command in CSG2 service configuration mode. To return
to the default behavior, use the no form of the command.
meter exclude control sip
no meter exclude control sip
Syntax Description This command has no arguments or keywords.
Defaults The default behavior is to include the SIP call control packets in the usage calculation.
Command Modes CSG2 service configuration
Command History
Usage Guidelines The meter exclude control sip command and the basis second command in CSG2 service configuration
mode are mutually exclusive. If you configure the meter exclude control sip command, do not configure
the basis second command.
Examples The following example shows how to exclude the call control packets for a SIP session from the usage
calculation for the SERVICE-A service:
ip csg service SERVICE-A
meter exclude control sip
Related Commands
Release Modification
12.4(15)MD This command was introduced.
Command Description
ip csg service Configures a CSG2 content billing service, and enters CSG2
service configuration mode.
meter exclude mms wap Excludes bytes for a WAP 1.x Multimedia Messaging Service
(MMS) session from the CSG2 usage calculation.
meter exclude network-init sip Excludes incoming Session Initiation Protocol (SIP) transactions
(that is, those that are initiated from the network) from the CSG2
usage calculation.
meter exclude pause rtsp Excludes the Real Time Streaming Protocol (RTSP) PAUSE time
from the CSG2 usage calculation.
meter exclude svc-idle Excludes the final service idle from the CSG2 usage calculation.