Filter
Top Products
A-90
Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01
Appendix A CSG2 Command Reference
ip csg psd keepalive
ip csg psd keepalive
To define the Cisco Persistent Storage Device (PSD) keepalive time interval for the CSG2, use the ip csg
psd keepalive command in global configuration mode. To reset the PSD keepalive timer to the default
value, use the no form of this command.
ip csg psd keepalive number-of-seconds
no ip csg psd keepalive
Syntax Description
Defaults The default value is 60 seconds.
Command Modes Global configuration
Command History
Usage Guidelines We recommend that you change the keepalive time interval only when directed to do so by
Cisco Technical Assistance Center (TAC) engineers. In most environments, the default value is the most
appropriate setting.
Examples The following example shows how to specify a PSD keepalive time of 300 seconds:
ip csg psd keepalive 300
Related Commands
number-of-seconds Time, in seconds, between PSD keepalives. The range is from 1 to 65535.
The default value is 60.
Release Modification
12.4(11)MD This command was introduced.
Command Description
ip csg bma keepalive Defines the Billing Mediation Agent (BMA) keepalive time interval
for the CSG2.
ip csg ipc keepalive Defines the Interprocessor Communication (IPC) keepalive time
interval for the CSG2.
ip csg psd Configures a Cisco Persistent Storage Device (PSD).
ip csg quota-server keepalive Defines the quota-server keepalive time interval for the CSG2.