Filter
Top Products
A-161
Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01
Appendix A CSG2 Command Reference
ip csg subscriber
ip csg subscriber
To define a subscriber interface as a CSG2 subscriber interface, use the ip csg subscriber command in
interface configuration mode. To restore the default setting, use the no form of this command.
ip csg subscriber
no ip csg subscriber
Syntax Description This command has no arguments or keywords.
Defaults The interface is not a CSG2 subscriber interface.
Command Modes Interface configuration
Command History
Usage Guidelines All traffic routed through the CSG2, including peer-to-peer traffic, must flow from a subscriber interface
to a network interface, or from a network interface to a subscriber interface. Therefore, configure the ip
csg subscriber command on only the subscriber interface, never on the network interface.
Examples The following example defines interface GigabitEthernet0/0.69 as a CSG2 subscriber interface:
interface GigabitEthernet0/0.69
ip csg subscriber
Release Modification
12.4(11)MD This command was introduced.