Filter
Top Products
A-165
Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01
Appendix A CSG2 Command Reference
map
map
To reference a header, method, or URL map that is part of a CSG2 billing policy, use the map command
in CSG2 policy configuration mode. To delete the reference, use the no form of this command.
map map-name
no map map-name
Syntax Description
Defaults None
Command Modes CSG2 policy configuration
Command History
Usage Guidelines The conditions specified in the referenced header, method, or URL map must be true in order for the
flows to be processed by the CSG2 accounting services. If the conditions are not true, the flows are not
processed.
When configuring a map, keep the following considerations in mind:
• You cannot specify different types of match patterns in a given map. For example, a map can include
one or more match header statements, but it cannot include both match header statements and
match url statements.
• You can specify up to three maps in a given policy: one for header matching, one for method
matching, and one for URL matching. For example, the following is a valid configuration:
ip csg map HOSTMAP
match header host1 value *.2.*.44
!
ip csg map URLMAP
match url */mobile/index.wml
!
ip csg policy MAP-POLICY
map HOSTMAP
map URLMAP
In this example, a flow must match both HOSTMAP and URLMAP in order to match policy
MAP-POLICY.
map-name Name of a header, method, or URL map, as configured with an ip csg map
command.
Release Modification
12.4(11)MD This command was migrated from CSG1.
Changes from CSG1: This command incorporated the following CSG1 commands:
• header-map
• url-map