Filter
Top Products
5-12
Cisco 7600 Series Ethernet Services Plus Line Card Hardware Installation Guide
OL-16146-10
Chapter 5 Installing and Removing SFP and XFP Modules
Removing and Installing XFP Modules
Figure 5-14 10-Gigabit XFP Transceiver Module
Installing the 10-Gigabit XFP Transceiver Module
Caution The XFP transceiver is a static-sensitive device. Always use an ESD wrist strap or similar individual
grounding device when handling XFP transceivers or coming into contact with system modules.
To install an XFP transceiver, follow these steps:
Step 1 Remove the XFP transceiver from its protective packaging.
Note Do not remove the optical bore dust plugs until directed to do so later in the procedure.
Step 2 Check the label on the XFP transceiver body to verify that you have the correct model for your network.
1 Transmit optical bore 4 Bale clasp (locked position)
2 Receive optical bore 5 Dust plug
3 Transceiver socket connector 6 Bale clasp (unlocked position)
3
4
144375
1
2
5
6