Filter
Top Products
6-2
Cisco 7600 Series Ethernet Services Plus Line Card Hardware Installation Guide
OL-16146-10
Chapter 6 Troubleshooting
Troubleshooting Installation Issues
Troubleshooting Line Card Power Issues
Table 6-1 provides solutions for troubleshooting line card issues.
Cisco 7600 Series ES+ line
card does not go beyond the
bootup stage
Cisco 7600 Series ES+ line card
STATUS LED transitions
continue and alternates green,
amber, or off
Follow the recommended action for the displayed error
message.
Cisco 7600 Series ES+ line
card is not up to date
During Cisco 7600 Series ES+
line card initalization, the need
to update the FPGA is
automatically detected
Follow the system prompts to update the FPGA image.
If the Cisco 7600 Series ES+ line card is cycling because
of an FPD problem, the most likely cause is a FPD failure
or that the FPD package file is not present.
For more information about performing FPD upgrades,
refer to the “Upgrading Field-Programmable Devices”
chapter in the Cisco 7600 Series Router SIP, SSC, and SPA
Software Configuration Guide .
Cisco 7600 ES+ Line Card Is Deactivated
Possible Problem Observations and Comments Solutions
Cisco 7600 Series ES+ line
card is not fully seated in the
chassis slot
Output of the show diag slot
command
STATUS LED is off
Follow this procedure:
• Remove the Cisco 7600 Series ES+ line card from the
slot.
• Inspect the Cisco 7600 Series ES+ line card. Verify
there are no bent pins or parts and that there is nothing
that could prevent a good connection.
• Insert the Cisco 7600 Series ES+ line card into the
chassis slot.
Cisco 7600 Series ES+ line
card is not at the minimum
hardware revision level
Error message indicating the
Cisco 7600 Series ES+ line card
is not at the minimum FPGA
revision level
Output of the show hw-module
subslot fpd command
Output of the show diag slot
command
STATUS LED is off
Follow the FPD upgrade process to update the FPGA.
For more information about performing FPD upgrades,
refer to the “Upgrading Field-Programmable Devices”
chapter in the Cisco 7600 Series Router SIP, SSC, and SPA
Software Configuration Guide .
Cisco 7600 ES+ Line Card Transitions Repeatedly From On to Off
Possible Problem Observations and Comments Solutions