Filter
Top Products
B-48
Cisco SFS 7024 InfiniBand Server Switch Hardware Users Guide
OL-8794-05
smSetDefBcGroup
Set a default broadcast group in the subnet manager.
Syntax:
Options:
Sample Output:
NOTES: This will create a default broadcast group with 1 member with a GUID of
0x00066A00FACADE01ull. Executing this command with no parameters creates the default
broadcast group with pkey=0xffff, MTU=4 (2048), RATE=3 (10GB), SL=0, QKey=0 Valid MTU
values are 1(256), 2(512), 3(1024), 4(2048), and 5(4096) Valid RATE values are 2(2.5GB),
3(10GB), 4(30GB), 5(5GB), 6(20GB), 7(40GB), 8(60GB), 9(80GB), 10(120GB) Valid Values for
SL is 0 (only value supported at this time) DO NOT CREATE THIS GROUP WITH PARAMETERS
THAT YOUR FABRIC CANNOT SUPPORT!
smShowDefBcGroup
Display the default broadcast group configuration.
Syntax:
Options:
Sample Output:
smSetDefBcGroup [clear] | [pKey] [mtu] [rate] [sl]
[qKey]
clear
Clear the configuration.
pKey
Partition Key. 0 defaults to use the default PKey at index 0.
mtu
Maximum tranfer unit. 0 will default to use the port's mtu.
rate
Data Rate. 0 will default to use the port's current rate.
sl
Service level.
qKey
Queue Key. If no value entered, defaults to 0..
-> smSetDefBcGroup 0xffff 4 3 0
smShowDefBcGroup
None.
-> smShowDefBcGroup
Default Muticast group: PKey: 0xffff MTU: 4 Rate: 3 SL: 0