Filter
Top Products
B-3
Cisco SFS 7024 InfiniBand Server Switch Hardware Users Guide
OL-8794-05
Provides commands for configuring SNMP trap destinations and security parameters required to
access the SFS 7024 from an SNMP manager.
Capture:
Provides commands for capturing switch-specific information for the purposes of analysis and
debugging.
To list commands within a functional group, simply type in the functional group name. For example, to
list all of the firmware commands, type Firmware. The system would display the following:
-> Firmware
fwUpdateSlot Update units firmware
fwUpdateChassis Update units firmware
fwListFiles List the contents of the firmware ramdisk
fwShowUpdateParams Display firmware default update parameters
fwSetUpdateParams Configure firmware default update parameters
showCapability Display the capabilities/features
fwVersion Display Firmware revisions
bootQuery Query boot image information
bootSelect Change boot selection
Online Help
The online help for the CLI provides, for each command, all necessary information to successfully
execute the command. For example, typing help fwShowUpdateParams displays the following
information:
NAME
fwShowUpdateParams
SYNOPSIS
fwShowUpdateParams
DESCRIPTION
Display the default update firmware settings.
OPTIONS
None.
Keyboard Shortcuts
• The CLI keeps a history of recently executed commands. This history is available via the Up and
Down arrow keys.
• Users may edit the current command with the Left and Right arrow keys.
• Tab completion: pressing the Tab key after typing at least one character either completes a command
or lists all the available commands that begin with the characters already typed.
Accessing the CLI
Note The CLI can be accessed via Telnet, SSH, or through the SFS 7024 RS232 serial port. The following
instructions use Telnet.
Step 1 Telnet to the IP address of the SFS 7024 (the default IP address is 192.168.100.9) with the following
command:
telnet <IP ADDRESS>