Cisco Systems SFS 7024 Switch User Manual


 
Contents
i
Cisco SFS 7024 InfiniBand Server Switch Hardware Users Guide
OL-8794-05
New and Changed Information v
Preface vii
Audience vii
Organization vii
Conventions viii
Related Documentation viii
Obtaining Documentation, Obtaining Support, and Security Guidelines viii
Installation 1-1
Statement 1019—Main Disconnecting Device 1-2
Statement 1045—Short-circuit Protection 1-3
Statement 1074—Comply with Local and National Electrical Codes 1-5
Statement 1075—Hazardous Voltage or Energy Present on DC Power Terminals 1-6
Planning the Installation 1-7
Rack Specifications and Recommendations 1-7
Cable Requirements 1-8
Uninterruptible Power Supply 1-8
Installation Tasks Checklist 1-9
Safety Information 1-9
Tools and Equipment Required 1-11
Check the Installation Site 1-11
Unpack the Equipment 1-12
Installation Tasks 1-12
Mounting Kit 1-13
Mark the Rack 1-13
Install the Rails in the Rack 1-13
Rack-Mount the Switch 1-14
Installing the Switch Face Plate 1-17
Installing the Spine and Leaf Modules 1-17
Removing a Module or Blank 1-19
Connect Equipment to the Ports and Power On the System 1-20
Bringing Up the System For the First Time 1-22
Changing the IP Address and Default Gateway 1-23
Updating Management Spine IP Addresses in a Redundant Management Configuration 1-27