Filter
Top Products
1-10
Cisco SFS 7024 InfiniBand Server Switch Hardware Users Guide
OL-8794-05
Warning
After installing system components in a rack never pull more than one component at one time out of
the rack on its slide assemblies. The weight of more than one extended component could cause the
rack to tip over.
Warning
Do not step on or stand on any component when servicing other components in a rack.
Warning
The chassis, when fully populated with leaf modules, spine modules, power and fan supplies, is very
heavy (approximately 175 lbs.). It is recommended that a lifting device be used to handle a fully loaded
chassis.
Caution Always load the rack from the bottom up, loading the heaviest item first.
Caution Make sure the rack is level and stable before extending any component from the rack.
Note Ensure that proper airflow is provided to components of the rack.
Protecting Against Electrostatic Discharge
Caution Use a grounded wrist strap designed to prevent static discharge.
Caution Static electricity can harm delicate components inside the system. To prevent ESD damage, users need
discharge any static electricity from their bodies before touching any electronic components. Touching
an unpainted metal surface will discharge static electricity.
Caution When transporting an ESD sensitive component, first place it in an antistatic container or packaging.
Electrical Safety Precautions
Warning
Do not work alone when working with high voltage components.
Warning
This unit may have more than one power cord. To reduce the risk of electrical shock, disconnect both
cords before servicing the unit.