Filter
Top Products
2-43
Cisco SFS 7024 InfiniBand Server Switch Hardware Users Guide
OL-8794-05
Figure 2-66 Time Service - Manual Setup
To set time zone and daylight saving time (DST) settings:
Step 1 In the Time Zone drop-down, select the correct time zone based upon Greenwich Mean Time (GMT).
Step 2 Using the Which, Day, in Month drop-downs, set the start and end dates for daylight saving time.
Step 3 To save, click on Apply.
Figure 2-67 Time Service - Time Zone/Daylight Saving Time Setup
Time Zone Tips:
In the U.S. the following time zones are in effect:
–
Eastern Standard Time = GMT –5
–
Central Standard Time = GMT –6
–
Mountain Standard Time = GMT –7
–
Pacific Standard Time = GMT -8
Daylight Saving Time Tips:
For most of the United States, Daylight Saving Time in the United States begins at 2 a.m. on the second
Sunday of March, and ends at 2 a.m. on the first Sunday in November.
Additionally, for those US regions that do not observe DST, the start and end dates in the Which, Day,
in Month settings, should be set to the exact same date.
Configuring the Chassis OOB IP Address
To configure the chassis IP address:
Step 1 From the OOB LAN IP submenu, click Set OOB LAN IP.