Filter
Top Products
B-70
Cisco SFS 7024 InfiniBand Server Switch Hardware Users Guide
OL-8794-05
Note The offset parameter specifies a time zone the system should use when setting the time. In the
U.S. the following time zones are in effect: Eastern Standard Time = GMT -5; Central Standard
Time = GMT -6; Mountain Standard Time = GMT -7; Pacific Standard Time = GMT -8. GMT
= GreenwichMean Time..
timeDSTConf
Configure and display the Daylight Saving Time settings.
Syntax:
Options:
Sample Output:
Note Example: To set the daylight savings time to start on the 1st Sunday of April and end on the 4th
Sunday of October the command would be: 'timeDSTConf 1 1 4 4 1 10'.
timeNtpTimeout
Display or set the number of seconds to wait for a NTP response.
Syntax:
timeDSTConf [sw sd sm ew ed em]
sw
Start which, valid values: 1 = 1st, 2 = 2nd, 3 = 3rd, 4 = 4th, 5 = 5th
sd
Start day, valid values: 1 = Sunday, 2 = Monday, 3 = Tuesday, 4 = Wednesday, 5 =
Thursday, 6 = Friday, 7 = Saturday
sm
Start month, valid values: 3 = March, 4 = April, 5 = May, 6 = June, 7 = July, 8 = August, 9
= September, 10 = October, 11 = November
ew
End which, valid values: 1 = 1st, 2 = 2nd, 3 = 3rd, 4 = 4th, 5 = 5th
ed
End day, valid values: 1 = Sunday, 2 = Monday, 3 = Tuesday, 4 = Wednesday, 5 =
Thursday, 6 = Friday, 7 = Saturday
em
End month, valid values: 3 = March, 4 = April, 5 = May, 6 = June, 7 = July, 8 = August, 9
= September, 10 = October, 11 = November
-> timeDSTConf 2 1 3 1 1 11
Timezone offset successfully configured
Current DST = Start: 2'nd Sunday of March End: 1'st Sunday of November
timeNtpTimeout numSeconds