Filter
Top Products
CBM-253 User’s Manual
88
CITIZEN
[Function] Sets the printing mode of the numbering (consecutive numbering counter).
• m indicates the number of figures for printing.
m = 0 Only the actual number of figures are printed. In this case, n will have no
meaning.
m = 1~5 This is the maximum number of figures for printing.
If the number of figures of the counter value is greater than number of
figures specified by this command, the last m figures of the counter value
will be printed.
• n specifies the printing position inside the number of figures for printing.
n = 0 Printing will be carried out from the right end. When the value has less than
the specified number of figures, the empty places will become spaces.
n = 1 Printing will be carried out from the right end. When the value has less than
the specified number of figures. the empty places will become 0.
n = 2 Printing will be carried out from the left end. Spaces will be added to the
right side of the value in order to make up the specified number of figures.
[Items requiring caution]
If either m or n is outside the defined range, the setting will be invalid
[Initial value] m = 0
[Reference] GS C 1, GS C 2, GS c, GS C ;
[Program example] [Printing result]
Refer to the program example and the printing result for GS c on page 87.