Filter
Top Products
CBM-253 User’s Manual
23
CITIZEN
4. 7 Opening the print head
CAUTION
• Do not touch the head or motor immediately after printing, since these parts will be very hot and there
will be a danger of burning your hand.
1. Switch OFF the power switch. and remove the power plug from the mains outlet.
2. As shown in the figure, open the printer cover and the auto-cutter and then press the head-up lever down
forwards.
3. While sliding the head opening knob in the direction shown by 1 in the figure, lift up the head in the
direction shown by 2 in the figure to open the head.
Note: This operation should only be carried out when cleaning the head or platen.