Filter
Top Products
CNWR-811P User Guide
14
WAN Configuration
To configure the WAN port:
• Select
WAN
from the menu.
• Select the appropriate connection type (Direct Connection or PPPoE) on the screen below,
then Click the “Configure” button.
Figure 7: WAN Screen
Tip:
If your connection documentation does not refer to PPPoE, select
Direct Connection
.
WAN - Direct Connection
Figure 8: WAN - Direct Connection
Data - WAN (Direct Connection)
Device ID
Device (Host)
Name
Normally, there is no need to change the default name, but if your ISP
requests that you use a particular “Hostname”, enter it here. This name
will be provided to, and recorded by, the remote DHCP Server.