Filter
Top Products
Configuration
23
LAN/Device Status
The
LAN Status
link on the menu will result in a screen like the example below.
Figure 13: Status Screen
Data – LAN/Device Status
Device
Firmware Version
Version of the firmware (embedded software, including this program)
which is currently installed.
Hardware ID
The hardware ID of this device, used by the manufacturer.
Network Address
Translation
This will display "Enabled" (NAT is On) or "Disabled" (NAT is Off)
LAN Port
Physical Address
The "Hardware" address of this device, as seen by other devices on
the Internal LAN.
IP Address
The IP Address of this device, as seen by other devices on the Inter-
nal LAN.
Network Mask
The Network Mask (Subnet Mask) for the IP Address above.
DHCP Server
This shows the status of the DHCP Server function. The value will be
"Enabled" or "Disabled".
DHCP Table
IP Address
The IP Address which has been allocated by the DHCP server to the
other device.
Physical Address
The Physical Address (Hardware Address) of the device which has
been allocated a IP Address.