Filter
Top Products
DHCP
37
Using another DHCP Server
You can only use one (1) DHCP Server. If you wish to use another DHCP Server, rather than
the CNWR-811P’s, the following procedure is required.
1. Disable the DHCP Server feature in the CNWR-811P. This setting is on the LAN screen.
2. Configure the DHCP Server to provide the CNWR-811P’s IP Address as the Default
Gateway.
To Configure your PCs to use DHCP
This is the default setting for TCP/IP under Windows 95/98/ME. See Chapter 4 – Client
Configuration for the procedure to check these settings.