Compaq 2724 Switch User Manual


 
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
G-8
Glossary
Writer:
Chris Seiter
Project:
Glossary
Comments:
283237-001
File Name:
2824_G.DOC
Last Saved On:
6/27/97 5:15 PM
Protocol service using IP. It adds the ability to distinguish among
multiple destinations within a
given host.
UTP See Unshielded Twisted Pair.
XMODEM Protocol XMODEM is a serial communications protocol used to
transfer ASCII or binary data. XMODEM uses 8-bit
characters and transfers data using 128-byte blocks, each
of which is followed by a checksum or CRC. If the
checksum (CRC) on a block is correct, the next block is
sent; otherwise the same block is retransmitted.