Filter
Top Products
9-10 Chapter 9, Mass Storage Configuration
Addendum 108431-001 (11-88) to
Manual No. 108033-003
3. Install the external fixed disk drive con-
troller. Refer to Chapter 7, REMOVAL
AND REPLACEMENT PROCEDURES.
4. Follow the instructions in Chapter 3,
SETUP PROGRAM, for running the SETUP
program to initialize the CMOS memory to
reflect the number of fixed disk drives
currently installed.
5. Insert the EXTDISK diskette into drive A
and restart the computer.
6. Copy the files with .DSK extensions from the
root directory of the EXTDISK diskette to
the working copy of the NetWare AUXGEN
diskette.
□ If you are running the Novell NETGEN
program from a fixed disk drive or
network, you may want to create a
subdirectory for the files with .OBJ
extensions found in the root directory or
the EXTDISK diskette. If so, create a
directory named “DSK_DRV_.203”
and copy the files with .OBJ extensions
into the directory.
□ If you are running the Novell NETGEN
program from diskettes, the program
prompts you to “Insert the disk
DSK_DRV_.203 in any drive.” At this
point, insert the EXTDISK diskette into
the diskette drive.
□ If you are installing NetWare V2.1, you
must apply a patch to several files. (No
patches are required for V2.11.) After
copying the following files to a separate
workspace, apply the COMP21 patch:
COMPSURF.OBJ (from UTILOBJ-1
diskette)
DISKED.OBJ (from UTILOBJ-1
diskette)
INSTOVL.OBJ (from UTILOBJ-2
diskette)
The following files should appear in the
root directory of the EXTDISK diskette:
COMP21.BAT Batch file to run
patch
COMP21.DOC Documentation
for patch
SFTPATCH.EXE Main patch
program