Filter
Top Products
the display is opened. To prevent damage to the display and the computer,
ensure that the display assembly is opened at a 90-degree angle.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
4. Remove the keyboard assembly (Section 3.7).
5. Remove the right clutch ground clip located between the clutch and the
CPU base.
NOTE: The right clutch clip for Models 420 and 430 is different than
for Models 400 and 410, and is illustrated in the circular insert
(Figure 3-170).
6. Life up both ends of the ZIF connector slide simultaneously [1],
carefully opening the slide [2] (Figure 3-171).
7. Lift the display cable out of the connector slide [3], being careful
not to pull or twist the cable (Figure 3-171).