Compaq 400 486 DX2/40 MHZ 250 MB 4 MB 9.5 Personal Computer User Manual


 
connected
===========================================================================
Table 5-6. Diskette Drive Computer Checkup Error Codes
===========================================================================
Error Code Description Recommended Action
===========================================================================
600 - xx Diskette ID drive types The following steps apply to
test failed 600 - xx through 698 - xx error
codes:
601 - xx Diskette format failed 1. Replace the diskette.
2. Check and/or replace the
602 - xx Diskette read test diskette cable.
failed 3. Replace the diskette drive.
4. Replace the system board.
603 - xx Diskette write, read,
compare test failed
604 - xx Diskette random seek
test failed
605 - xx Diskette ID media
failed
606 - xx Diskette speed test
failed
607 - xx Diskette wrap test
failed
608 - xx Diskette write-protect
test failed
609 - xx Diskette reset
controller test failed
610 - xx Diskette change line
test failed
697 - xx Diskette type error
698 - xx Diskette drive speed
not within limits
---------------------------------------------------------------------------
699 - xx Diskette drive/media 1. Replace media.
ID error 2. Run Computer Setup.
===========================================================================
Table 5-7. Serial Computer Checkup Error Codes
===========================================================================
Error Code Description Recommended Action
===========================================================================
1101 - xx Serial Port test Replace the system board.
===========================================================================
Table 5-8. Modem Communications Computer Checkup Error Codes
===========================================================================
Error Code Description Recommended Action
===========================================================================
1201 - xx Modem Internal Loopback The following steps apply to