Compaq 400 486 DX2/40 MHZ 250 MB 4 MB 9.5 Personal Computer User Manual


 
determine which COM port
is assigned to the card.
---------------------------------------------------
The card conflicts From MS-DOS: Run PCCARD to
with the system board select a different COM
serial device. port for the PC Card.
From Windows: Select
Computer Setup from the
Compaq Control Center, then
select the PC Card option
and choose a different COM
port for the PC Card.
---------------------------------------------------
The card is not PC Contact Compaq Reseller
Card compliant. Support for a list of PC
Cards tested successfully
in Compaq PC Card
platforms.
---------------------------------------------------------------------------
Modem or network PC Network driver is not Select Computer Setup
Card does not work. set up properly. from the Compaq Control
Center and select the
PC Card option; then
view the Online help
for detailed
instructions on setting
up network PC Cards.
---------------------------------------------------------------------------
Storage PC Card does SRAM and flash Select Computer Setup from
not work. memory cards require the Compaq Control Center;
the memory card then select the PC Card
driver to be loaded. option to enable the
memory card driver.
---------------------------------------------------
Flash memory cards Select Computer Setup from
require the Microsoft the Compaq Control Center;
FlashFile System to then select the PC Card
be loaded. option to enable the flash
file system.
---------------------------------------------------
Hard disks on flash Select Computer Setup from
mass storage cards the Compaq Control Center;
require the PC Card then select the PC Card
ATA driver to be option to enable the PC
loaded. Card ATA driver.
---------------------------------------------------------------------------
Problem Probable Cause Solution(s)
---------------------------------------------------------------------------
You are trying to From MS-DOS: Run CARDINFO
access the card using to determine which drive
the wrong drive letter is assigned to the
letter. card.
From Windows: Select
Computer Setup from the
Compaq Control Center
to see which drive
letter is assigned to
the card.