Compaq HB1004 Switch User Manual


 
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-10
Setup and Configuration
Writer:
Weldon W. Rowan
Project:
Setup and Configuration
Comments:
File Name:
SAB_3.DOC
Last Saved On:
7/2/98 4:53 PM
The Factory Default configuration settings never change and are always
available to apply to the hub. When you select Factory Setting from the Main
Menu the Factory Default configuration is loaded into the Current
configuration. See Table B-3 in Appendix B for a list of all factory default
settings.
Displaying System Information
Use the Information command to display and modify system information about
the hub, or for quick system identification. View a description of the system:
Figure 3-7. System Information Screen
Q
System Description – Identifies the hub
Q
System Uptime - Length of time the management agent has been running
Q
System Name – User-defined name for the hub
Q
Contact - Contact person for the system
Q
Location - Specifies the area or location where the system resides