Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-11
Compaq HB1004 10Base-T Hub User Guide
Writer:
Weldon W. Rowan
Project:
Setup and Configuration
Comments:
File Name:
SAB_3.DOC
Last Saved On:
7/2/98 4:53 PM
Changing System Configuration
Use the Configuration command from the Main Menu to modify current values
for the following parameters:
Figure 3-8. System Configuration Screen
Parameter Description
Q
IP Address - IP address of the HB1004 agent. The agent runs the SNMP
protocol over the UDP/IP transport protocol. In this environment, all
systems on the Internet, such as network interconnection devices are
assigned an IP address.
Q
MAC Address - Hardware address of the agent. The MAC address can
also be found on a sticker on the front panel of the hub above the COM
port.
Q
Subnet Mask - Subnet mask of the agent you’ve selected. This mask
identifies the host address bits used for routing to specific subnets.
Q
Default Gateway - Default gateway used in passing trap messages from
the hub agent to the management station.
Q
TFTP Server IP – Sets the TFTP server IP address.
Q
TFTP-Download File – Specifies the download file name.