Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-15
Compaq HB1004 10Base-T Hub User Guide
Writer:
Weldon W. Rowan
Project:
Setup and Configuration
Comments:
File Name:
SAB_3.DOC
Last Saved On:
7/2/98 4:53 PM
Q
Retry - Number of attempts to make contact.
Q
Filename - The *.bin file to download.
Q
Transferred Block - Current number of data block being transferred.
Q
Total Blocks - Total number of blocks to transfer.
Restarting the Agent
Use the Restart command from the Main Menu to reset the agent. LEDs on the
agent will light up sequentially as it executes the initialization test. This will
also reset the statistics counter to 0 (zero).
Reverting Configuration to Factory Settings
Use the Factory Settings command from the Main Menu to change all
configuration settings back to the factory defaults. See Table B-3 in Appendix
B for a list of all factory default settings.
Saving a New Configuration
The Save Configuration option saves any changes you have made to the hub’s
configuration. The hub will use the new configuration each time it boots up
until you change it again.
Resetting the Configuration
The Reset Configuration option returns the hub to the last saved configuration.
See Page 3-7 for an explanation of the different system configuration settings.
Help
Use the Help option to get a brief description of each of the Main Menu
options.