Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-12
Setup and Configuration
Writer:
Weldon W. Rowan
Project:
Setup and Configuration
Comments:
File Name:
SAB_3.DOC
Last Saved On:
7/2/98 4:53 PM
Assigning Trap Managers
Use the Trap Managers command from the Main Menu to modify current
values for the following parameters:
Figure 3-9. Trap Managers Screen
Q
SNMP Community Names - The community strings authorized for trap
management access. All community strings used for IP Trap Managers
must be listed in this table.
Community Name - A community entry authorized for trap
management access.
Access Management - access is restricted to read-only (RO) or
read/write (RW).
Status - The status of the current entry can be set to VALID or
INVALID.
Q
IP Trap Managers - IP management stations selected to receive trap
messages from the HB1004 agent.
IP Address - IP address of the management station.
Community Name - The community string required for trap
management access.
Status - The status of the current entry can be set to VALID or
INVALID.