Filter
Top Products
Removal and Replacement Procedures
Maintenance and Service Guide 5–7
6. Remove the hard drive by following these steps:
a. Turn the notebook upside down with the front facing you.
b. Remove the T8M2.0×6.0 hard drive cover screw 1.
c. Slide and hold the tab on the hard drive cover to the
left 2.
d. Swing the right edge of the hard drive cover up and to
the left 3.
✎
The hard drive cover is included in the Miscellaneous Plastics
Kit, spare part number 345066-001.
Removing the Hard Drive Cover
Spare Part Number Information
Hard drives (includes hard drive bezel and frame)
80-GB 5400-rpm
60-GB 5400-rpm
40-GB 5400-rpm
60-GB 7200-rpm
(all models)
(all models)
(all models)
(nw8000 only)
345632-001
345631-001
345630-001
345855-001