Filter
Top Products
Software Updates and Recovery and System Software
Hardware and Software Guide 8–3
Accessing ROM Information
To determine whether an available ROM update is a later
ROM version than the ROM version currently installed on the
computer, you need to know the version of the currently
installed ROM.
To display ROM information from within Windows
» Press the fn+esc hotkey. In the fn+esc display, the version of
the system ROM is displayed as the BIOS (basic input-output
system) date. On some computer models, the BIOS date is
displayed in decimal format. To clear the display, press
esc.
ROM information can also be displayed in the Setup Utility.
The procedure for displaying ROM information is described in
this section. For more information about using the Setup Utility,
refer to the “Setup Utility” section later in this chapter.
To display ROM information in the Setup Utility:
1. To open the Setup Utility, turn on or restart the computer in
Windows, and then press
f10 while the prompt “Press <F10>
to enter setup” is displayed in the lower-left corner of the
screen.
2. If the Setup Utility does not open with system information
displayed, use the arrow keys to select the Main menu.
(When the Main menu is selected, ROM and other system
information is displayed.)
3. To close the Setup Utility without changing any settings, use
the arrow keys to select the Exit menu > Exit Discarding
Changes, and then press
enter. (The computer restarts in
Windows.)