Filter
Top Products
8–12 Hardware and Software Guide
Software Updates and Recovery and System Software
Changing the Language of the Setup Utility
The following procedure explains how to change the language of
the Setup Utility. If the computer is not in the Setup Utility, begin
at step 1. If the computer is in the Setup Utility, begin at step 2.
1. To open the Setup Utility, turn on or restart the computer in
Windows, and then press
f10 while the prompt “Press <F10>
to enter setup” is displayed in the lower-left corner of the
screen.
2. Use the arrow keys to select System Configuration >
Language, and then press
enter.
3. Press
f5 or f6 (or use the arrow keys) to select a language, and
then press
enter.
4. When a confirmation prompt with your preference selected is
displayed, press
enter to save your preference.
5. To set your preferences and exit the Setup Utility, press
f10,
and then follow the instructions on the screen.
Your preferences go into effect when the computer restarts in
Windows.