Filter
Top Products
2-24
Compaq R6000 Series UPS Operation and Reference Guide
Compaq Confidential – Need to Know Required
Writer:
Dan Lyons
Project:
Compaq R6000 Series UPS Operation and Reference Guide
Comments:
revised as per A. May
Part Number:
347223-022
File Name:
c-ch2.doc
Last Saved On:
3/24/99 1:41 PM
Charging Batteries
With the Compaq R6000 UPS in Standby Mode, allow the batteries to charge
before putting the UPS into service. The battery status can be monitored using
the LCD display. See Chapter 3, “Operation,” for more information on using
the front panel controls and LCD display.
IMPORTANT:
The battery packs will charge to:
■ 90% of their capacity within 4 hours.
■ 100% of their capacity within 24 hours.
Compaq recommends that you allow the batteries to charge for at least 24 hours before
using them to supply backup power to your devices.
Installation is Now Complete
For information on operating the UPS, see Chapter 3, “Operation.”
For information on changing the configuration of the UPS, refer to Chapter 4,
“Configuration.”