Compaq R6000 Series Power Supply User Manual


 
Battery Maintenance
5-7
Compaq Confidential – Need to Know Required
Writer:
Daniel E. Lyons
Project:
Compaq R6000 Series UPS Operation and Reference Guide
Comments:
revised as per A. May
Part Number:
347223-022
File Name:
f-ch5.doc
Last Saved On:
3/24/99 1:58 PM
6.
Slide out the Compaq R6000 UPS battery packs.
34 kg
75 lb
WARNING:
To reduce the risk of personal injury or damage to the
equipment:
Observe local Occupational Safety requirements and guidelines
for manual material handling.
Obtain adequate assistance to lift and stabilize the assemblies
during installation or removal.
Battery Packs (2 per unit): 75 lb (34 kg)
Figure 5-6. Sliding out the battery packs
WARNING:
Batteries retain high voltage. As soon as the replacement batteries
are safely in place in the UPS chassis, remove the battery connector covers, and
place them on the batteries removed from the unit. Remove any jewelry; do not
allow tools near the exposed battery connector port.
7.
Set the battery packs safely aside to install the replacement batteries.
NOTE:
Refer to “Disposing of Used Batteries” in this chapter for information on disposal
of used batteries.