Filter
Top Products
8-11
Additional battery pack (4 Cell, 6 Cell and 8 Cell )
O
PTIONAL
D
EVICES
Additional battery pack (4 Cell, 6 Cell
and 8 Cell )
You can increase the portability of the computer with additional battery packs (4
Cell: PA3451U-1BAS/PA3451U-1BRS, 6 Cell: PA3465U-1BAS/PA3465U-
1BRS, 8 Cell: PA3457U-1BAS/PA3457U-1BRS). If you’re away from an AC
power source, you can replace a low battery with a fully charged one. See Chap-
ter 6, Power and Power-Up Modes.
Additional AC adaptor
If you frequently transport the computer between different sites such as your
home and office, purchasing an AC adaptor for each location will reduce the
weight and bulk of your carrying load: PA3468U-1ACA/PA3468E-1AC3.
USB FDD Kit
The 3 1/2" external FDD drive module can be connected to the USB port. For
details on connecting the 3 1/2" external diskette drive module, refer to Chapter
4, Operating Basics.
External monitor
An external analog monitor can be connected to the external monitor port on the
computer, Port Replicator. The computer supports VGA and Super VGA video
modes. To connect a monitor, follow the steps below.
CAUTION: If an external monitor is connected to the computer, do
not connect the Port Replicator. First disconnect the external moni-
tor from the computer then connect the Port Replicator and use its
external monitor port.
Note: The Resume feature can be used with an external monitor.
Simply enable Resume and the computer will maintain the data as it
is displayed on the external monitor.
1. Connect the monitor to the external monitor port.
2. Turn the monitor’s power on.
When you turn on the power, the computer automatically recognizes the monitor
and determines whether it is color or monochrome.